Do-it-yourself brazier: creating an approachable and stationary option (83 photo ideas)

Many do not imagine a full-fledged outdoor recreation without fragrant shish kebab. Craftsmen can make a brazier out of bricks with their own hands. It is simply necessary for the exit session.

Going to nature, you can build a compact design from improvised materials. And for a summer residence, a gazebo equipped with a barbecue is more suitable.

Where to start building?

Think about where you want to build a barbecue. It is better to choose a recreation area for this.

Care must be taken to provide protection from the weather. A homemade hearth can be installed in a country gazebo, under a canopy or in a partially open veranda.

Masters often take on the difficult task of how to make a brazier in the form of a multifunctional oven.

Indicators of medium sizes: width - 1.6 m; height - 1.6 m; depth - 0.8 m. For a multifunctional furnace, it is required to make a base, an example of which is a strip foundation.

The master usually supplements a complex design with various functional add-ons:

Niches. They are convenient to use to store skewers and other utensils.
Notches. Firewood is piled in them so that they dry near the hearth.
Sink. It is installed when there is a real opportunity to bring communications. It is convenient to wash hands or dishes in it.

A table with benches is placed near the hearth. The owner is free to choose furniture from budget or expensive options, depending on their financial capabilities and taste preferences.

Brazier drawings will help to correctly create a project. After all, it is necessary to take into account not only the technical side of the issue, but also the aesthetic component.

If you look at the photo of the brazier, then it should be the central element of the composition. It is important that all surrounding objects are combined.

Construction of a brazier from a brick

The design involves the construction of a solid foundation. It is made from sand, gravel, cement and refractory bricks. In addition to building tools, the master will need a drill with a special nozzle or a concrete mixer to prepare the mortar.

It is necessary to prepare reinforcing bars with a reinforcing mesh, as well as metal corners with hardware. The master prepares the material in advance to create the crate.

Phased construction

Mark the construction site and carry out the markup. After that, a pit is created with a width of 0.6 m and a length of 1.6 m.

The top layer of soil is removed to a depth of 0.6 m.

Make a pillow out of sand. Its thickness should not be less than 10 cm. The pillow must be carefully tamped. Formwork is placed around the perimeter of the pit.

The next step is knitting reinforcement. Metal bars are interconnected in the form of a lattice and lowered to the bottom of the pit.

Note!

Make a cement mortar and pour it into the formwork. It must be pierced with a metal rod so that no air remains inside.

For the preparation of a cement mixture, grades 150 and 200 are suitable. Crushed stone with sand is also added to the solution. The proportional ratio of cement, sand and gravel is 1:3:5. The solution will also need water - 1 or 2 buckets, depending on how wet the sand is.

The compacted mortar is smoothed and leveled. Under the bricks you need to make an even base.

For waterproofing, roofing material and special mastics are used.

As soon as the foundation hardens, you can start laying.

Nuances that the master should be aware of

Furnace brick has excellent fire resistance, but in the cold it can become brittle. Therefore, a gazebo with a brick barbecue is the best option.

Note!

Before starting construction work, the material is soaked in water. Bricks are able to absorb liquid, which can adversely affect the performance of the solution.

The mixture itself is prepared from other components and differs in consistency. It is made from cement, sand and slaked lime in a ratio of 1:3:1.

Laying starts from the corners. The length of the back wall is 3 bricks, and on the sides 2.5 bricks. The width must be at least 1.5 bricks. In the process of laying, the master gently taps the surface of the brick with a mallet in order to fit it closely to the next one.

metal structure

A metal brazier can be made by a craftsman who knows how to handle a welding machine. The master will need sheet metal, metal corners or pieces of reinforcement, a pallet with a grate of the same dimensions and a marker with a tape measure.

The design is a deep brazier on legs-supports. If desired, the owner can supply the barbecue with a smokehouse, then the household will always have the opportunity to enjoy the delicacies of natural smoking.

Note!

Experienced craftsmen can try their hand at making homemade barbecues. From two connected cylinders, they create a brazier-smokehouse. The master will need the ability to work with a grinder and a drill.

The chimney is made of a pipe, and the stands, handles and legs are made of metal. It is necessary to prepare hinges, nuts with bolts, special enamel and a wick. The brazier from the balloon can be decorated at your discretion.