How to make a DIY Christmas wreath: 70 cool ideas

The easiest and fastest way to make a Christmas decoration.

Cutediyprojects.com

What do you need

  • Volumetric base made of foam or cardboard (read below on how to make it yourself);
  • pencil - optional;
  • wide tinsel;
  • stationery pins or tape;
  • fabric - optional;
  • glue gun, fishing line or thread - optional;
  • any

How to do

If you do not have a suitable base, cut out a ring from thick cardboard. If you want to make your workpiece voluminous, glue paper or film to it.

Wrap the tinsel on top and secure it with pins or tape. If you are afraid that the base will be visible, you should wrap it with a fabric of a suitable color.

Using glue, fishing line or thread, you can decorate the wreath with Christmas toys, cones, ribbons or other decorative elements.



Christmas wreaths from Christmas balls

Such a wreath is also done quite quickly. You just need to stock up on a mountain of balls.

What do you need

  • Thin hanger;
  • Christmas balls;
  • matching ribbon.

How to do

As in the previous method with tinsel, the hanger must be bent to form a ring. Then the upper part of the wire should be untwisted.

Put a lot of Christmas balls on the hanger and fasten the wire on top. Tie a large bow on the hook.

You can diversify the wreath by adding artificial coniferous branches with decorations to it. To do this, leave a little space on both sides of the hook without filling it with balls. Then glue the branches there, and already on them - a bow.

Balloons can also be attached to the voluminous base for a wreath with a glue gun:

An original wreath can be made by simply wrapping the base with any fabric or thread and adding festive decorations.

sadieseasongoods.com, loveoffamilyandhome.net

What do you need

  • Volumetric base or cardboard;
  • fabric, burlap, twine or yarn;
  • scissors;
  • glue gun;
  • stationery pins or - optional;
  • any Christmas decorations.

How to do

Such wreaths can be made from both volumetric and flat cardboard bases.

If using cloth or burlap, cut into wide strips. Wrap the base, securing the selected material with glue, pins or tape.

Then glue some decorations to the wreath. It can be Christmas decorations, artificial coniferous branches, New Year's decor and much more. Here are some ideas for inspiration:






Christmas wreaths from ribbons

If the previous options with wrapping the base are too simple for you, decorate the wreath with ribbon figurines. Here you have to make an effort, but the result is worth it.

What do you need

  • Hairbrush;
  • glue gun;
  • narrow green ribbon;
  • narrow red ribbon;
  • narrow gold ribbon;
  • scissors;
  • cardboard;
  • pencil;
  • green felt;
  • Christmas balls;
  • red pompoms;
  • wide colored ribbon;
  • thread;
  • needle.

How to do

Using a comb and glue, make figures from green, red and gold ribbon as shown in the video.

Cut out a ring from cardboard. Now use it to make a second felt ring. Glue both blanks.

On the side of the base where there is no felt, make a loop of gold ribbon and glue Christmas balls. Cover the place of their fastening with felt.

Glue ribbon blanks and pompons to the same side in a circle, as shown in the video. Sew a bow from a wide ribbon and fasten a small piece of gold ribbon in the middle. Place the bow over the balloons.

And here is another interesting version of a wreath of ribbons. For the base, a circle is taken, cut out of a disposable plate. But you can also use a cardboard ring, as in the previous method.

New Year's wreaths of pompoms or balls of yarn

You can buy pom poms or make your own. We will show you how to make a wreath from homemade pompoms.

What do you need

  • Yarn;
  • a device for making pom-poms or a fork;
  • scissors;
  • glue gun;
  • bulk base or cardboard;
  • Christmas decorations - optional.

How to do

From yarn - multi-colored is better - make a lot of pompoms. If they are of different sizes, the wreath will turn out more interesting.

In the video above, pompoms are made using a special device. But you can use other methods as well.

A similar device is easy to make from cardboard:

Using a fork, you can make small pompoms:

No less beautiful will turn out without any devices, if you just wind the yarn around your fingers:

Trim the edges of the pom poms with scissors. So they will be more neat and fluffy. Glue them to a bulk base or cardboard ring. If desired, you can decorate the wreath with decorative items.

Here's how unusual these pom-pom wreaths look:







In the same way, small balls of yarn can be glued to the base. Similar decorations look no less original:




New Year's wreaths from cones

For those who like to make masterpieces from natural materials.

What do you need

  • secateurs - optional;
  • twine;
  • glue gun;
  • cones;
  • Christmas balls;
  • dried;
  • nutshell;
  • fruit bones;
  • sponge;
  • orange paint;
  • White paint;
  • artificial snow spray.

How to do

Twist the rods into a ring, as shown in the video. Cut off the excess with secateurs. As a basis, you can use a bulk blank - ready-made or do-it-yourself as shown in the first method.

Make a loop of twine on top and secure with glue.

Glue cones, balls, peel, shells and seeds to the wreath. Using a sponge, tint the wreath with orange and white paint. Sprinkle it with artificial snow.

Here are more examples of decorating cone wreaths:






You can make a voluminous base from a video about a tinsel wreath or use the tips from this master class:

A wreath with a flat cardboard base will also turn out very beautiful:

New Year's wreaths from branches

For such wreaths, both living and artificial ones can be used.

What do you need

  • Willow rods or voluminous base;
  • wire;
  • secateurs;
  • fir branches;
  • threads;
  • glue gun - optional;
  • Christmas decorations - optional.

How to do

If you choose rods as the basis, twist them into a ring and wrap them with wire.

Use pruning shears to cut large spruce branches into several small ones. Attach them to the base with wire. If desired, make a loop from the last one (this is not necessary, since the wreath can simply be hung from the base).

Wrap the branches with thread so that they do not stick out. Decorations can be glued or wired to the wreath.

Wreaths made of branches, especially natural ones, look very beautiful and elegant:




New Year's paper wreaths

Beautiful decor elements from the usual colored and corrugated, as well as from unnecessary newspapers.

Plain paper wreaths

What do you need

  • Scissors;
  • cardboard;
  • pencil;
  • White paper;
  • glue;
  • green double-sided paper in different shades;
  • Red ribbon;
  • red double-sided paper;
  • thick film;
  • flat beads;
  • threads;
  • needle;
  • hole beads.

How to do

Cut out a ring from cardboard, and then - according to the resulting template - the same one from white paper.

Glue two green sheets together and circle the cardboard ring with a pencil. Draw a larger circle and a smaller one in the middle. Cut the workpiece along the last marked lines.

Lubricate the cardboard ring with glue and glue it to the green paper blank. Make cuts on paper and glue the resulting rectangles to the ring. On the same side, place a loop of tape. Lubricate the ring with glue and cover with a blank of white paper.

Fold a few sheets of green and red paper in half crosswise and cut along the fold line. Then fold them into a narrow accordion, as shown in the video. Cut each harmonica into small pieces. Opening them and alternating colors, place the blanks on the base in a circle.

Draw a small circle on the film with glue and place the beads along the contour and in the middle. Cut out this circle and sew some thread to it, putting beads on it in the process. Glue flat beads on the other side of the workpiece.

Tie the resulting toy to the wreath. Instead, you can take a ready-made Christmas ball or other suitable decoration. Make a bow out of the ribbon and tie it to the top of the wreath.

Taking a disposable plate as a basis and gluing strips of colored paper to it, you can easily and quickly make a Christmas decoration:

From twisted paper strips you get such a cute wreath:

Newspaper wreaths

What do you need

  • knitting needle;
  • newspapers;
  • glue;
  • brush;
  • green paint;
  • red paint;
  • Red ribbon.

How to do

Using a knitting needle, twist two sheets of newspaper into a tube, secure the tip with glue. Turn the tube into a ring by gluing the edges.

Fold a few more sheets of newspaper into wide strips and glue them in half lengthwise separately. Wrap them around the ring, making a thick base for the wreath.

With the help of knitting needles, make many tubes of different lengths from pieces of newspapers. Twist each of them and squeeze out the middle with your hands. The video shows this process in detail.

Glue the resulting blanks to the base. Color them green and red. Make a bow out of ribbon and glue it to the top of the wreath.

And here is a version of a completely different wreath from the same newspaper tubes:

happinessishomemade.net

What do you need

  • Cardboard;
  • scissors;
  • green corrugated paper;
  • a pencil with an eraser on the end;
  • glue;
  • red pompoms;
  • Red ribbon.

How to do

Make a wide ring out of cardboard. Cut the paper into small squares. Using the back of the pencil, bend each of them and glue to the base.

happinessishomemade.net

Attach pom-poms or other decorations to the wreath. Make a loop out of the ribbon by threading it through the ring.

An original and simple wreath can be made by simply wrapping crepe paper around the base, tying a bow and attaching Christmas decorations:

Corrugated paper will make beautiful poinsettia flowers that need to be glued onto a flat base:

Christmas wreaths from plastic bottles

Instead of throwing away unwanted plastic containers, turn them into original decorations.

What do you need

  • Stationery knife;
  • pliers;
  • drill;
  • spray red paint;
  • rope;
  • Christmas tree beads;
  • decorative bells;
  • glue gun - optional.

How to do

Cut off the bottoms of the bottles. Make vertical cuts on them along the lines of the depressions. Bend the corners of each cut section inwards. For reliability, pinch the folds with pliers.

Drill a hole in the middle of each workpiece. Paint the plastic with red paint on both sides. Take two blanks and connect them with cloves inward, as shown in the video. Pass a rope through them.

Put the rest of the blanks on it, alternating them in the same order.

At the end, tie the rope tightly, forming a wreath from the blanks. Put beads on it and attach bells on top. They can be hung on beads or glued.

And you can also make a wreath of plastic "leaves":