How to dye a mink coat at home. How to dye a fox collar

Dear Clients

Prepayment for tailoring products is not less than 50% of the cost of work.

Factory "Lynx" also offers Additional services such as: painting, cutting and hauling.

Dye fur is produced in different colors. We dye both individual skins and finished fur products (we do not paint sheepskin coats) .

When painting finished fur products, be careful. Paint happens without fabric lining, only skins are dyed. Before painting, you are checked for the possibility of painting.

You can check it yourself if you want. : take your fur product that you want to dye, slightly open the lining and wet the skin well. After that, pull the soaked skin with force in different directions, if the skin is torn, it means that poor-quality dressing was used in tailoring and when painting your product may fall apart - paint it IT IS FORBIDDEN if the skin stretches easily to the sides - paint CAN .

We warn you in advance, when sewing a fur product, many companies often stretch the skin so that it is larger, such things after painting I can sit up to 30% .

Fur dyeing

Shearling coats, sheepskin (NOT SHEARED) AND LEATHER - WE DO NOT COLOR!

• Painting time 2 weeks
• Shrinkage of a fur product during painting 30% (1 size)
• Shrinkage during dyeing always occurs and the product shrinks uneven
• It is necessary to restore (restorate) the product after dyeing necessarily!

  Restoration of products after dyeing
  

  The size	In Malakhovka
  Vest	10.000 rub.
  Jacket (length up to 65 cm)	from 15.000 to 18.000 rubles.
  Short fur coat (length up to 90 cm)	from 18.000 to 20.000 rubles
  Short fur coat (up to 105 cm)	from 20.000 to 23.000 rubles.
  Fur coat long (from 110 cm.)	25.000 rub.
  Recut new lining	25.000 rub.
  Flare (depending on the length of the product)	from 10 - 30%
  Hood	2.000 rub.

  Prices do not include the cost of the stock (up to size 50)

  A bit of history about dyeing coats, furs and skins

  Animal fur has been necessary for mankind throughout the history of its existence. And today, fur remains a valuable and commercially viable commodity, because it is used not only for warmth, but also for decoration and, of course, is a luxury item.

  The skins of fur-bearing animals consist of a dense undercoat and longer and stiffer hairs that rise above this layer. The main function of the undercoat is to maintain the animal's body temperature, while the longer outer coat is to protect the skin during rain or snow. Mostly fur skins are sold at auction. Most are purchased manufacturing companies specializing in tailoring products using fur or brokers. The largest auction centers are located in New York, Montreal and St. Petersburg.

  In the modern fur industry, fur is used for tailoring or decorating outerwear. Often, in order for the finishing color to blend well with the color of the main material of the product, it is used fur dyeing in different tones. quality dressing and dyeing of fur very important, because it will depend on how long the product from it will last. Many are interested in the question: is it possible dye the fur so that it does not lose its quality? Of course! Moreover, if skin dyeing was produced in compliance with the necessary technology, the fur can last longer. That's how dye natural fur so that the skins remain soft and elastic, only professionals know. Sometimes the fur, on the contrary, is bleached or this method is used. natural fur dyeing, in which only longer hairs are shaded. This is what happens in some cases. silver fox fur dyeing. By the same method Can you dye fox fur? and give the product a very original look. When sewing a mink coat or coat, it is also advisable dyeing fur or mink coats in one color, if there are skins that are the same in softness, length of the pile and density of the undercoat, but initially different in color.

  The selection of skins for the product is not easy and requires a lot of furrier experience. The advantage of the fur material is that, if necessary, you can replace pieces with defects with others that are ideal for the main raw material. In such cases, it may also be necessary dye mink fur, arctic fox or other fur-bearing animal in the color of those skins that were selected for the product. It is possible to give a fresh look to a coat or fur coat that has been worn for several years, if paint old fur in another, more saturated shade. A competent selection of fur makes a fur coat as if sewn from one large skin, without focusing on the joining of different fragments.

  Information about where can i dye my fur Now it's not hard to find. It is important to turn to professionals, because such material is quite expensive and requires a special approach. Usually, these are special workshops or fur dyeing studio. Such organizations have special equipment and, most importantly, extensive experience in working with different types fur, so you should have no doubts where to dye natural fur .

  Fur skins can be dyed different ways. The main ones are namazny, okunochny or combined. In each individual case, the most optimal of them is used.

  Where to dye fur in Moscow can be found from various sources. It should be noted that this procedure is quite expensive and only a high-quality service can guarantee a good result and not disappoint. So just trust trusted sources , in such a non-standard type of service as fur dyeing in Moscow . Fur dyeing price will depend on several factors: the method of painting and the used chemicals, (size, length, style) if this is a product.

  Examples of work on dyeing fur and skins

The stereotype that fur products should be exclusively natural colors has long been destroyed. More and more fur showcases are full of models painted in trendy, boldest colors. Particularly relevant are products that combine genuine leather and fur.

For example, leather jackets and jackets with bright fur inserts on collars and pockets are now a popular trend. Colored fur is also trimmed with such clothes as women's dresses, sweaters, vests. Bright fur hats also won the love of the youth.

Unfortunately, dyed fur has one drawback - over time, namely, after 4-5 seasons, it begins to fade and fade. If the product is loved, and you don’t want to part with it, then the question comes to mind - is it possible to dye natural fur yourself?

It turns out that it is possible, and even without the risk of damaging an expensive product. It is best to safely refresh the color of the fur with the help of special color sprays from Salamander. Spray cans are called Fur-Fresh, and have an assortment of different shades. This paint, in addition to the main purpose, has a number of additional advantages - it returns softness, silkiness and shine to the fur.

It is worth noting that this paint will not work to radically change the color of the fur, it can only enhance the existing shade or give it a little more depth and saturation. It is best to spray paint only collars, hats, and other parts that will not come into contact with the bag, because the paint can leave marks on it with constant contact. To paint the product with this paint, you need to apply it on clean fur, massage it lightly and then dry it.

There is another way to dye natural fur at home. For this, ordinary hair dye is used. After all, fur is similar in structure to human hair, and therefore such paint is suitable and safe. To paint a thing with it, you need to remove the entire lining, then lightly treat the skins with glycerin, this will prevent them from drying out, and only then proceed to painting. The fur is painted according to the same principle as the hair, using a brush. Hold the paint as directed in the instructions. Then the fur is washed and dried.

There are only three rules to keep in mind:
1. You can dye fur with hair dye only in darker shades, but not lighter than the original tone..
2. When washing off the paint, in no case should the leather fabric of the product be wetted!
3. Don't try to repaint a new item just because you don't like the color. The described technologies can only be applied to small damaged areas of the fur, observing the precautions described in the article.

If you doubt whether you can dye the fur yourself without damaging it, then give the thing to a dry cleaner, where they also provide services for various dyes.

In the process of long-term wear, a fur product may lose its attractiveness only due to the fact that the fur has faded either from the sun or from exposure to precipitation. In this case, there are two ways to restore. Specialized companies that provide dry cleaning and painting services are able to do it efficiently. But you can give a “second life” to your favorite thing at home. Following the instructions and applying a share of your own imagination, you will be able to create a unique work of art.

If the age of the fur product is indicated by its color, then you can update the appearance with the help of painting.

For gray astrakhan, only black or Brown color. The mink is dyed in native colors in order to restore faded shades. Mouton products are suitable for black or brown pigment. Fur things in beige tones are dyed in all shades of brown to enhance the intensity of the native color. Choose a paint one or two shades darker for work.

The main condition for high-quality and uniform staining is. The best cleaning agent proved to be an alkaline solution, its composition is as follows:

• soda (dessert spoon);
• salt (dessert spoon);
• ammonia (a teaspoon);
• about 15 drops of detergent
• 1 liter of water.

Lightening yellowed white fur is an additional element of color restoration. To do this, use a solution with hydrogen peroxide (a teaspoon) and ammonia (10 drops). This tool can remove yellowness from silver fox fur. In the process of processing with such a composition, deep soaking should be avoided. First, a test is made on an inconspicuous area of ​​\u200b\u200bthe product. 15 minutes is enough for lightening. It must be remembered that A longer process will make the tips brittle.

Remove yellowness on fur gray rabbit chalk and starch help for a while. The powder is evenly and with little effort rubbed over the top of the pile and shaken off. This method will not harm the product, so you can use it often. Gray rabbit fur is dyed with hair pigment. There is absolutely safe method, in which an aqueous solution of blue is gently applied with a brush to the entire surface of the product. The composition should be light blue.

To ennoble faded raccoon fur, hair dye is used with a brightening effect, as a result of which the product will look gold or silver plated.

You can update the fox fur with thick potassium permanganate. Treat it gently with a sponge, not allowing things to get wet.

Faded fur ends stain spray paint for suede. Spray the product slowly, keeping a distance of about 70 centimeters between the fur coat and the sprayer.

How to dye fur with hair dye?

For dyeing polar fox or mink on your own, hair dyes are suitable. This method has been tested in practice and always gives positive results when painting not too old things. It is better to check the effect of even high-quality products on a small inconspicuous area of ​​\u200b\u200bthe product.

To dye fur at home, you will need to follow these steps:

1. Straightening the strands of natural fur, apply a thin layer of oily cream or glycerin to the mezra.
2. Gently moisturize the entire fur surface.
3. Apply the product as carefully as when coloring hair.
4. Leave for a while. Duration of staining - according to the instructions on the package with the dye.
5. To enhance the effect of the paint, a saline solution is evenly applied to the entire surface.
6. Wash off the paint under the stream of water from the shower.
7. Excess is removed with a rag or blotting paper.

After drying, the fur is combed, observing the natural direction of the pile. Such paint lasts up to six months on a fur product, and this is often enough to make the thing look updated.

A simplified version of tone saturation is coloring with tinting shampoo (in accordance with the instructions on the package).

For coloring with multi-colored paints, home-made stencils are used. The spots are painted alternately.

Faux fur is easier to dye. You can use toning shampoo and hair dye. The sequence of actions is as follows:

1. Before staining, the product is fixed.
2. Apply the agent in the direction of the fibers.
3. Leave the paint to soak in. The time must match the instructions in the instructions.
4. After the procedure, the fur is washed, dried and combed.

Experts do not recommend experimenting with staining new things.

Home or professional dyeing extends the life of the fur product for a short time. After some time, the pigment comes off, and the thing becomes faded again.

Fur products have always been distinguished by their invulnerability to high temperature differences and other factors. external environment However, sooner or later, the fur on them may fade, lose its former luster, become stained or simply shed. However, the loss of color in a fur coat is not a sentence at all, and it is possible to restore its former brightness without resorting to specialists. And today we will look at how to dye natural fur (for example, mink and arctic fox) and artificial fur in the most effective ways.

We paint fox fur products

In case of very strong contamination or discoloration, it is necessary to treat its surface with some kind of alkaline solution. Coloring elements do not get into the structure of oily or dirty hair. Therefore, to achieve an impeccable result, you need to make an appropriate solution. The cleaner is prepared as follows:

1. 2 teaspoons of salt are added to 1 liter of water.
2. 1 teaspoon of ammonia and the same amount of detergent.
3. 2 teaspoons baking soda

The resulting substance should be applied to the fur with a brush. This product dries naturally.

When processing the inside of the fur coat, it should first be treated with glycerin or a fat cream. This is done to prevent it from drying out.

What color is better to choose?

The answer to this question is ambiguous. In any case, the final choice is yours. However, experts recommend painting the fox in dark colors. If you want to dye your fur coat a lighter shade, pre-treat it with hydrogen peroxide.

Before dyeing the fur at home, you need to thoroughly moisten the fur coat in water. The usual hair dye is applied to the surface of the fur. It is not worth delaying the application of this substance. Do not forget about safety measures - use rubber medical gloves when working. They can be purchased at almost any pharmacy individually or in a package of 100 pcs. When applying paint to the fur, smooth the fur coat with your hand - so the substance will spread more evenly over the surface. After that, it is necessary to withstand the product for several minutes (as indicated on the paint instructions). Next, rinse the fur in warm water. It is best to add vinegar there. Now you can move on to drying. So that the fur does not “sit down” in the future, gently stretch it. Pin it with pins if necessary.

How to dye mink fur?

Mink fur is very similar in structure and appearance to human hair, so it should be dyed only with an aerosol or spray gun at a distance of at least 50 and no more than 80 centimeters from the surface. In order for the paint to be well absorbed into the material, it is necessary to carefully comb it after each application of a new layer. With the help of a comb, the paint is more evenly distributed over the surface of a fur coat and other fur products, as a result of which they will look fresh and attractive. As we noted earlier, mink is very similar in structure to human hair. Because of this, it is necessary to select a paint for it that would not harm its qualities. It is best to use a material that has been tested on your curls, that is, ordinary hair dye. This is sold in almost every supermarket and market. The range and variety of colors will satisfy even the most capricious fashionista, so choose the appropriate option, and then feel free to apply paint on a fur coat.

Drying

As for drying, such restored products can be processed with an ordinary home hair dryer. In this case, you should periodically comb the fur so that in the future it does not fall off. To add shine to the coat, use a hair balm. It will soften the fur well and make its color more saturated.

How to dye faux fur?

First of all, you need to decide what color you will paint this fur. Although, in general, the principle of work does not differ from whether you repaint the fur coat radically or process its surface only partially. The difference is only in time.

How to dye faux fur? As in the case of natural, hair dye will be the best remedy. If you want to make the color of your fur coat dark or light (that is, one that is very different in shade from the true one), use persistent options. If you are going to process the fur only partially, a regular tinting shampoo is quite suitable for such purposes.

So, you bought the right paint. What to do next? Before dyeing the fur at home, you need to thoroughly degrease the surface of the fur coat and remove all dirt from it. To do this, use a cotton swab previously moistened with detergent or shampoo. And one more thing - before staining, it is better to check the color of the paint in advance on a piece of paper. Sometimes it happens that the bottle does not match the specified shade. Or you just don't like it. Then you will have the opportunity to change it, and meanwhile the fur coat will not suffer from double "torture".

How to dye fur at home? When applying the material to the fibers, make sure that the fur is evenly placed on the surface. To avoid unpainted areas, use a comb (same as with natural products). The material itself is applied with a brush in the direction of the fibers. Thus, the paint will capture not only the upper part of the fur coat, but also its fabric base.

Wait a few minutes until all the pigment is absorbed. The exact time of each paint is different, so always follow the application instructions. After the paint is well absorbed into the fur, rinse it off with water, shampoo if necessary. If the coat is washable, you can place it in washing machine. After that, comb the fibers with a comb and let the product dry. Comb again after drying. If the fabric base of the fur coat is not washable, remove the remaining paint from it with pieces of a cotton swab soaked in warm water.

Conclusion

So, we found out how to dye fur at home, as well as what tools you need to have available for this.

Undoubtedly, it will be much easier to take it to a dry cleaner or to specialists. Then the fur coat will definitely not deteriorate under any circumstances. However, you can do it yourself, but at your own peril and risk. When painting or changing the color of this kind of clothing, many factors should be taken into account - the age of the fur coat, the density of the seams, the possibility of the skin drying out. Can you dye a mink coat? Answer: of course. But first it has to be processed.

For this you will need:

· glycerin;

· ammonia;

· special means for washing of fur products;

It is necessary to carefully coat the inside of the skins themselves (and not the lining) with glycerin. This is necessary so that they do not dry out after getting wet.

And the fur itself should be treated from dirt with an alkaline solution, which consists of three teaspoons of salt, one teaspoon of ammonia and a similar amount of detergent. All this must be poured into one liter of warm water and add a pinch of soda. Then mix thoroughly.

All this must be applied to a fur coat, laid out on the floor without folds, from the front side, carefully brushing the fur with a brush. This procedure will clean it of dirt, due to which the paint may lie unevenly. After that, the fur should dry on its own.

How to dye a fur coat yourself?

Now you can paint.

1. To solve the question of how to dye fur, you will need several packs of high-quality hair dye (depending on size and density) and a large ceramic bowl.

2. The paint in it must be diluted according to the instructions on the package.

3. Then, paint should be applied to the unfolded fur coat with a special brush or brush, after slightly wetting the fur. It is advisable to put on gloves before this - if necessary, it will be possible to equalize the substance directly on the clothes.

4. After 30-40 minutes, rinse the fur in water with vinegar, and then blot thoroughly with paper towels until slightly damp. It is forbidden to wipe and wring out the fur more actively.

5. Then you should let the coat dry on its own. You can stretch it a little on the shoulders so that it does not sit down.