WiFi router wireless from Kyivstar. Setting up the Internet and Wi-Fi network Kyivstar: features of connecting equipment

In the 21st century, the Internet has ceased to be a luxury. Exit to global network is a vital necessity, so most of us are already connected to the network. But the problem is that it's not always wired Internet can meet the needs of all users. If you have multiple devices in your office or home that need to be connected to the network at the same time, the solution is to wifi internet router.

Wi-Fi router from Kyivstar

wifi router allows you to use wireless Internet anywhere in your home.

In addition, you can simultaneously
connect multiple devices to the network.

We offer Huawei WS319 router. With a stylish design, this compact device will blend harmoniously into any interior.

Developers have equipped this model two antennas, which increases the range and penetration of the signal, the power of which is 5 decibels. This power is enough to use without barriers WiFi Internet, both in an apartment and in a private house or office.

The speed of this router: 54 - 300 Mbps.

GetWi-Fi router Kyivstar profitable and easy

Conditions receiving wifi router Kyivstar compare favorably with the conditions provided by other providers.

For example, when connecting Wi-Fi some providers use a form of entering into a long-term contract with clients. Moreover, some of them provide a router for 1 hryvnia for rent. That is, in case of early termination of the contract, the user must return the router to the provider and pay a fine for
breach of contract.

We do not require our clients to spend time studying and signing contracts.

We also do not apply any sanctions to our subscribers.

Connection wi fi router from Kyivstar worth 1 hryvnia is not a promotion. This service has been provided since 2011.

To connect WiFi routerKyivstar you need to complete all two conditions:

  • be a Home Internet subscriber and order the service at any Kyivstar service center in your city;
  • have enough funds on the account to activate the service.

If you are not yet using the "Home Internet from Kyivstar" service, fill out an application on our website and get your wifi internet router for 1 hryvnia!

Is there a connection fee?

All connection services Wi-Fi Internet are provided free of charge and include:

  • router installation;
  • setting;
  • demonstration.

In addition, you will get a free software update at the Kyivstar contact center.

To activate the service, you need to make an advance payment of UAH 300 to your account.

Important! Money (UAH 300) that you paid for service activation, will be returned to the account for 20 hryvnia every month for 15 months!

These are favorable conditions for the acquisition and connection WiFi router. Make the most profitable deal by connecting routerWiFi from Kyivstar.

Have questions? Write in the comments!

Setting up the router involves changing the necessary parameters in the device interface. The purpose of the setup can be not only to connect to the Internet, but also to perform operations such as installing local network, changing passwords, setting up ports. This article provides the most understandable instructions on "how to configure the TP-LINK WR741ND router" in various ways.

Type and purpose of indicators

To display the activity of certain processes and functions, the router has special indicators located on the front panel of the router.

The indicators have intuitive icons that show the activity of processes or device connections:

  1. device power indicator;
  2. function of testing the router for errors. If the indicator flashes periodically, no malfunctions were detected, if not, errors were found in the system accordingly;
  3. Wi-Fi module activity;
  4. LAN port indicators display connected computers to the device;
  5. indicator of device connection to the Internet;
  6. QSS system.

Connecting to a computer

The TP-LINKTLWR741ND router is connected to a computer using a Wi-Fi or LAN cable.

Router interface

To enter the router interface after connecting it, you must:

  • open browser;
  • enter the address 192.168.1.1;
  • enter login and password. Admin, admin are installed by default.

As a rule, the username and password of the device is indicated on the rear panel of the device itself. If your router is provided by your provider, the login and password parameters for logging in may differ.

Internet connection

Internet connection is carried out both using the setup wizard, which can be launched from the disk that comes with the router, and using the web interface. To configure, you will need the values ​​specified by the provider in the contract.

Before you start configuring the router settings, make sure that no IP address is set in the settings of your network card. For a correct connection, the option must be selected - obtain an IP address automatically.

Configuring a TP-LINK TL WR741ND router Kyivstar

To set up promotional routers from Kyivstar, you need to:

  • go to the device interface (192.168.1.1). The login and password are often changed by providers who provide the router, for example, on kyivstar routers, the password and login are kyivstar;
  • open the "Network" tab and go to the "WAN" section;
  • select "Dynamic IP Address" and click "Save";

To configure security, you need to open "Wireless Mode" and go to the "Wireless Security" section:


You can also change the default wifi password network to a more complex one that can provide a higher degree of protection.

Quick Setup

Quick setup of the TP-LINK WR741ND router allows you to configure settings even for users who do not have experience in setting up an Internet connection. For quick setup, you need to go to the device interface and select the "Quick Setup" menu. If you do not know the type of your Internet connection, then during the installation process it is recommended to select the "Auto-detect" item.

You will also need to enter your username and password, which are provided by the provider. With this function, the program will suggest the most appropriate settings for your connection. After applying all the settings, you must reboot the router for the new settings to take effect.

Video: TP-LINK TL-WR741ND quick setup

Manual setting

To set VPN connection parameters, perform the following operations:

  • open the "Network" menu section and go to the "WAN" item.
  • in the "WAN Connection Type" field, set the type to PPTP.
  • the User name and Password fields are filled in according to the data from the contract.
  • if your ISP provides separate settings for the IP address, max subnet, and gateway, you will need to enter these values ​​in the appropriate fields.
  • After entering all the parameters, click on the "Save" button.

To set up a PPPoE connection, do the following:


To set up a connection without a VPN connection, you should:


It is also worth mentioning the fact that some providers filter by the computer's MAC address.

To solve this problem, just do the following:


Setting for operators MTS, Beeline (Beeline), Rostelecom

The settings for various operators, whether it be Beeline or MTC, differ only in the provided values ​​​​of IP addresses, subnet masks and other parameters. Some operators specify these settings in the contract.

WiFi setup

Wi-Fi is configured from the "Wireless Mode Settings" subsection, which is located in the "Wireless Mode" tab:


The local network

To configure the local network of the TP-LINK TL WR741ND router, you must perform these operations:

  • go to the "Network" menu and open the "DHCP" section;
  • enable "DHCP server";
  • specify the range of addresses that will be assigned to computers on the home network. For example, the first address is 192.168.1.100 and the last one is 192.168.1.200;
  • save settings.

The TP-LINKTLWR741ND router has a fairly simple and intuitive interface that allows you to establish an Internet connection, as well as configure various settings without any inconvenience. And thanks to the quick setup, connecting to the Internet is the easiest

Question answer:

How to set up a device on Windows 7?

Configuring the TP-LINKTLWR741ND router on various operating systems differs only in setting the option to automatically obtain an IP address when connected.

For Windows 7: Control Panel - "Network Center" - "Change adapter settings" - "Properties" of "Your connection" - "Internet Protocol version 4 (TCP / IPv4)" - Open properties - "Obtain an IP address automatically".

What are the features of the router settings on Windows 8?

Connecting and setting up the Internet in Windows 8 is similar to setting up the Internet in Windows system 7, so you will not have any unexpected problems during the setup process.

What to do if there is no software disk?

How to set up without a disk? by the most simple solution in this situation is to download this software on the Internet, if this is not possible, then it will help you manual setting Internet settings of the TP-LINKTLWR741ND router.

If it is wrong to choose the type of connection that your provider uses, or incorrectly set the necessary parameters (IP, login, password) that the provider issues, then the router simply will not be able to connect to the Internet, and accordingly will not be able to distribute it.

In this article I will tell you how to set up a router for Kyivstar Home Internet. By the way, you can read mine on this provider. With this provider, everything is very simple, since it uses the simplest connection type - . And it does not bind by MAC address. If your ISP uses the same technology, then everything is very simple.

Before setting up a router, I advise you to make a complete . In order to remove the parameters that someone may have already set. They can interfere with us.

We connect the power, and go to the settings of the router. How to do this is described in detail in the article. The fact is that if you reset the settings on the router to the factory settings, then immediately after connecting the network cable from the Kyivstar provider, the router will start distributing the Internet. Both cable and Wi-Fi. Because, by default, the Dynamic IP connection technology is installed. To set up, almost nothing is needed. I have entered the settings on the WAN page.

If the internet is not working:

Be sure to make sure that the indicator on the router is blinking, which indicates that the Internet cable is connected. If it does not blink, then check if you connected the cable to the WAN connector correctly.

Also, in the router settings, go to the tab network – WAN(this is on the example of a Tp-Link router, for other manufacturers, the settings may differ) and check if the Dynamic IP connection technology is installed. It is very important.

As you can see, the setup is very simple. But, even if the Internet is already working fine for you, then the setup is not over. Be sure to set up security on your wireless network. I will not write here how to do it. Because there is a separate, detailed

Today, almost all people use the Internet, since life without it is almost impossible. The Internet is one of the means of communication, our indispensable assistant, as it provides answers to any of our questions. Also very often the Internet is used at work. Consequently, users at home have installed and wifi routers , since we need the Internet not only on a computer, but also on a phone, tablet and on all kinds of other gadgets. Therefore, in this article we will consider a rather popular question: how to change the password on a Kyivstar wi-fi router?

Everyone knows that Kyivstar is one of the most popular mobile operators Ukraine, the operator also provides Internet services, which can be used with the help of special equipment. In this article, we only consider wi-fi routers.

For many, it happened that, for one reason or another, they had to change the password on the router. Therefore, we will try to explain as clearly as possible how to do this.

So, what you need to do if you forget your password: each router can be reset to factory settings, in which case all settings will be reset, including the Internet connection and password. You can also find out the password in the instructions for the router, then you don’t have to reset all settings.

If you need to change the old password on the wi-fi router, then you can use our following tips:

  • Internet connection required;
  • On the Internet, in the address bar of the browser, write 192.168.1.1. Thus, you will enter the control panel of your wi-fi router;
  • Next, you need to enter your username and password. In most cases, this word is kyivstar. It is both a username and a password. Sometimes the word admin is used;
  • You need to find the "Wireless networks" - "Settings" section, and you should select WPA2 - PSK and enter your only invented password;
  • Or, in some modem modifications, immediately select "Wi-Fi Settings" and in the new window that opens, change the old password to a new one. There you can also name your router (network name);
  • Save all your settings.

To change the old password to a new one, you need to enter the old one, and then the new one and confirm the action.

If you have problems with changing the password on the router or you basically don’t figure out how to do it, then it’s better for you to contact the experts. On the appointed day and time, a specialist in this field will come to you and solve your problem.

Let's start with the fact that a router can be called any network device that allows you to simultaneously connect to the Internet from two or more "machines". The router can connect computers (PCs, laptops, etc.) both through a standard network cable as well as with the help of Wi-Fi.

Why set a password?

First, the question is a little wrong. Each router initially has its own factory settings, including the password. And if someone came up with a password, then he didn’t do it in vain. Access to the router allows you to change network settings. Any intruder who has gained access to your network will be able not only to use someone else's Internet for free, but also to view and download all the data transmitted over the Network.

Thus, by changing the standard (factory) password from the router to something more complex, you will protect yourself from theft of data and traffic. It is especially useful to do this for people organizing WiFi networks in cafes, restaurants, etc.

Forgot password - what to do

Each modem can be reset to default settings. This will reset not only your Internet connection settings, but also the password itself. After that, the password can be found in your router instruction book. Usually passwords are standard, like "admin", etc. Below we provide instructions for setting up a number of routers, where we indicate their standard passwords.

Reset router settings

Resetting the router is necessary when you cannot access the router. You just need to find the inscription RESET on the back of your transceiver. Insert a needle or match into the hole under this inscription and hold for 3-5 seconds. The lights on your modem should turn off. Now the router is rebooting and when it turns on again, all settings, including the password, will be reset to factory settings.

Video: how to set a password on a wifi router TP-LINK

New Password

The new password for your router should be as complex as possible. Try not to make passwords like Mom's birthday, dog's name, favorite football team, and so on. It is best to include letters of different case and numbers in the password that are not related to each other. Of course, ideally you can use characters that are not on the keyboard. Enter in any search engine "characters that are not on the keyboard" and copy them in order to add them to the password.

For wireless network

Now let's learn how to change the password from Wi-Fi on the router. Primarily:

  • you need to be connected to a wireless network. (if it does not have a password, then this is good, but if there is a password, then by default it is indicated on the back of your device);
  • then enter the IP address in the line of any browser;
  • then you will need to use the login and password combination (according to the factory settings, the login is usually the word admin, but the password can be different - password, admin, 1234, etc. (read below));

  • then you need to look for the “Wireless Network” or Wireless tab, where you go to the Wi-Fi settings section (there will be the “Encryption Type” (AuthenticationType) field, where you must select the WPA2-PSK value (or something similar). Here there is also a network name (SSID) and a passphrase (Passphrase, password, etc.));
  • then save your settings.

For router

If you want to understand how to change the name and password on a WI Fi router, then first read the general version of this procedure. To change the router password and username, log into the router at the addresses indicated above. Find the "Security" or "Account" tab, enter the old username and password and confirm the new password. Everything is extremely simple!

Setting a password

How to change password on yota wifi router

So, first of all, charge your transmitting device. Then wait half a minute. Open the list of wireless connections, where you should see an unsecured one called YOTA. Depending on the YOTA router model, the network may be password protected. The password for WiFi (wi-fi) is indicated on the back of the modem.

Connect to our network:

  • open Opera (Google Chrome or Mozilla) and enter IP 10.0.0.1. ;
  • enter security data - admin/admin;
  • now proceed to change the settings: select an arbitrary name for the network, select an eight-digit passkey;

  • fill in the "Type of protection" line with the choice of WPA2;
  • confirm saving the settings on the corresponding button.

    • D Link Router


    Tp Link Router

    TP Link Kyivstar is common name for modems used by Kyivstar provider. As usual, first:


    Zyxel router

    If you want to change the password for the Zyxel Keenetic Start router, then you are required to:


    This completes the setup of the Ziksel router. Save them to the appropriate button.

    Asus router

    To configure the Asus router, everything is the same:


    Changing the password for the routers of the provider

    trendnet

    As a router from the Trednet provider, you can use D Link, Huawei.

    Let's move on to setting them up, when you connect your device to a computer, or connect via Wi-Fi, then:


    upvel

    If you need to change your access key to the Upvel router in the settings, then:


    Router Netgear from Dom Ru

    To enter the router from DomRu, enter 192.168.0.1 in Opera (Chrome or Mozilla). Next, you will see a window with information about the connection. SSID is the name of your future Wi-Fi key - at least eight-digit access to the Network.

    To log into a Netgear router, you need to:


    Ukrtelecom

    As a router from the provider Ukrtelecom, you can use Huawei:


    If you change the login value, then when you enter a new key, you will not have to confirm the current password for the admin account.

    Beeline

    The Beeline provider installs its own branded routers, but if you wish, you can choose / buy any other and use the settings that we described above.

    To set up their standard router, do the following:

    • type in Opera or Mozilla 192.168.0.1 or 192.168.1.1. The link to enter the router is admin / admin.
    • go to the “Wireless Network” tab and in the “Preshared key” item, enter the new value of the access key.

    Megaphone

    Megafon, like Beeline, uses its branded routers with Megafon logos, to enter its settings you need to:

    • at the top in Opera (Google Chrome or Mozilla) enter IP 192.168.10.1;
    • select a bunch of login / password - admin / admin (by factory settings);
    • go to the Manage tab and enter the desired eight-digit value in the key settings line;
    • confirm and save.

    Thus, now you and I know how to set up a particular router from various providers, how to protect our Wi-Fi network and router with a high-quality and reliable password.

To share with friends:
Similar posts